🌍 ECO DDL Since 2013 ⭐ 13+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu

Display Fixtures: Wood vs Metal vs Acrylic vs Metal+PVC

Author: HTNXT-Jonathan Reed-Light Industry & Daily Use Release time: 2026-11-18 02:28:02 View number: 20

Retail display stand example for fixture construction planning

A retail display stand example used to illustrate fixture selection.

Display fixtures should be selected by construction and footprint before finish or style. For a buyer moving from evaluation to execution, the useful comparison is not which material is universally best, but which material, dimension, weight and movement pattern fits the merchandise, floor plan, handling method and acceptance test. This guide compares five verified references from ECO DDL at the parameter level: LZ00023, LZ-019, LZ-007, yakeli35 and LZ00102.

ECO DDL (Dongguan Display Leader Co., Ltd.) is a display fixture manufacturer established in 2013 with OEM/ODM production and a stated 40,000 m² manufacturing base. The five references are not presented as a ranking. Each answers a different constraint: a narrow liquor fixture with movement, a metal bottle fixture with material customization, a 13 kg beverage upright, a compact stepped acrylic compartment, or a 4.3 kg acrylic cosmetic stand. Where the reference does not state a dimension or weight, this guide marks it for confirmation rather than guessing.

Quick comparison of the five fixture references

Start with the hard parameters. The table below separates confirmed values from items that must be fixed in the RFQ or drawing. It does not assign scores or assume load capacity from material type.

ReferenceConstructionDimensionsNet weightStructure and movement notesMerchandising use
LZ00023Wood liquor fixture40 × 40 × 160 cmTo be confirmedStable, wear-resistant, movableLiquor display and promotion
LZ-019Metal bottle fixture with customizable materialsTo be confirmedTo be confirmedMaterial customization stated; fixing and movement to be confirmedBottle display
LZ-007Metal+PVC beverage fixture45 × 31 × 130 cm13 kgUpright structureBeverage display
yakeli35Acrylic compartment fixture160 × 122.5 × 186 mmTo be confirmedStepped cabinet structureCompartment and small-item presentation
LZ00102Acrylic cosmetic stand50 × 30 × 150 cm4.3 kgCustomizable; fixing and movement to be confirmedCosmetic stand display

Dimensions and footprint: convert units before comparing

Dimensions only become useful when they are expressed in one unit and linked to the floor plan. LZ00023 is 40 × 40 × 160 cm; LZ-007 is 45 × 31 × 130 cm; LZ00102 is 50 × 30 × 150 cm; yakeli35 is 160 × 122.5 × 186 mm. Converted for comparison, yakeli35 measures 16 × 12.25 × 18.6 cm. LZ-019 dimensions are to be confirmed for the configured model.

LZ00023 and LZ-007 have similar width and depth ranges: 40 × 40 cm against 45 × 31 cm. Their heights differ by 30 cm, with LZ00023 at 160 cm and LZ-007 at 130 cm. That difference affects sight lines, top-product reach, wall or aisle placement, and the visual weight of the fixture in a retail plan. LZ00102 has a 50 × 30 cm footprint and a 150 cm height, so its floor footprint is close to the other floor-standing references while its 4.3 kg net weight and acrylic cosmetic format create a different handling profile.

yakeli35 is not on the same dimensional scale. Its 160 × 122.5 × 186 mm envelope is a compact compartment format with a stepped cabinet structure. Buyers should confirm whether it is intended for countertop, shelf or floor mounting; the verified description identifies the stepped cabinet structure but does not state a mounting method. For execution, compare the outside envelope, compartment opening, step depth and service clearance, not just the three headline dimensions.

Net weight: a handling signal, not a load rating

Net weight is stated for two references: LZ-007 at 13 kg and LZ00102 at 4.3 kg. LZ00023, LZ-019 and yakeli35 require weight confirmation. Net weight affects manual handling, shipping cost, floor protection, assembly method, movement hardware and installation risk. It does not establish how much merchandise the fixture can hold.

A 13 kg upright beverage fixture and a 4.3 kg acrylic cosmetic stand cannot be compared on stability from weight alone. Stability also depends on footprint, centre of gravity, base design, shelf loading, anchoring and the floor surface. Buyers should request the load per shelf and the overall load target, the test method, the permitted deflection or deformation limit, and whether the figure applies to a uniformly distributed load or a concentrated load. None of these load values are supplied in the five references.

Material and structure: what the verified references support

Material choice is a construction decision. It changes the production route, the joint details, the maintenance method and the way the fixture should be inspected. The five references cover wood, metal, acrylic and metal+PVC, but they do not provide a common load test or a common finish standard. That means the buyer should compare documented characteristics and then write the missing requirements into the specification.

Wood: LZ00023

LZ00023 is a wood liquor fixture at 40 × 40 × 160 cm. Its verified description includes stable operation, wear resistance and a movable configuration. For a wood fixture, the RFQ should confirm the wood-based material, edge treatment, surface finish, moisture protection and the exact movement components. The movable description is useful, but it does not by itself confirm castor type, locking, load per castor or floor clearance. Those details belong in the drawing and acceptance checklist.

Edge banding machine used in wood fixture production

Wood-based fixture production requires finish and edge details to be written into the specification.

Metal: LZ-019

LZ-019 is a metal bottle fixture with customizable materials. Material customization is a capability, not a finished specification. The buyer should define the metal substrate, finish, thickness, joint method, bottle retention detail, shelf pitch and cleaning access. Dimensions and net weight for LZ-019 are to be confirmed before it can be compared on footprint or handling with the other references.

Sheet metal laser area for metal display fixture production

Metal construction should be specified by substrate, finish and joint detail, not by material name alone.

Acrylic: yakeli35 and LZ00102

yakeli35 is an acrylic compartment fixture at 160 × 122.5 × 186 mm with a stepped cabinet structure. LZ00102 is an acrylic cosmetic stand at 50 × 30 × 150 cm and 4.3 kg, and it is customizable. These two references show different acrylic formats: a compact stepped compartment and a floor-standing cosmetic stand. The RFQ should define acrylic thickness, bonding or assembly method, shelf span, cleaning agents, replacement parts and the load target. The supplied references do not state acrylic thickness or a load rating.

Acrylic bonding process for display fixture assembly

Acrylic assemblies should be specified by thickness, bonding method and service access.

Metal+PVC: LZ-007

LZ-007 is a metal+PVC beverage fixture at 45 × 31 × 130 cm and 13 kg, described as an upright structure. A combined construction must be specified part by part. The buyer should confirm which components are metal, which are PVC, how they are joined, how the PVC surfaces are cleaned, and whether replacement panels or bumpers are available. The upright format does not confirm anchoring; that must be stated separately.

Movable versus static configuration

Only LZ00023 is explicitly described as movable in the verified reference. LZ-007 is described as an upright structure, not as movable or static. yakeli35 has a stepped cabinet structure; LZ00102 is a stand; LZ-019 is a bottle fixture. Buyers should not infer castors or anchoring from a product name.

For a movable fixture, the specification should confirm castor diameter, locking, load per castor, floor surface, threshold height, push height and aisle width. For a static fixture, it should confirm feet, floor or wall fixing, anti-tip measures, cleaning clearance and whether the fixture can be repositioned for promotions. A movable liquor fixture may need locked castors during trading hours; a tall beverage upright may need a stability or anchoring check. These are execution requirements, not assumptions about the five references.

Matching construction to load and merchandising requirements

Load requirements must come from the buyer’s merchandise plan. The five references do not include shelf load ratings, so the buyer should state the number of bottles or packs per shelf, the maximum unit weight, the shelf pitch and the expected customer interaction. A fixture can be structurally sound yet unsuitable if the shelf spacing, retention or access does not match the product.

  • Bottle display, LZ-019: confirm bottle diameter, shelf pitch, retention, load per shelf and material finish. Dimensions and weight must be added before comparing it with the other references.
  • Liquor display, LZ00023: confirm the 40 × 40 cm footprint against aisle and wall space, the 160 cm height against sight lines, and the movable configuration against floor surface and locking requirements.
  • Beverage display, LZ-007: confirm the 45 × 31 × 130 cm upright envelope, the 13 kg net weight, shelf load and stability. Ask whether anchoring is required and whether the metal+PVC split affects cleaning or panel replacement.
  • Acrylic compartment display, yakeli35: confirm the compact 160 × 122.5 × 186 mm envelope, compartment opening, step depth and mounting method. Check the load target for the intended small items.
  • Acrylic cosmetic stand, LZ00102: confirm the 50 × 30 × 150 cm footprint, 4.3 kg net weight, shelf load, customization scope and stability at the full height.

A practical selection path is to lock the merchandise unit and load target first, then the footprint and height, then the construction and movement, and only then the finish. For example, if a liquor programme needs a narrow 40 × 40 cm footprint, 160 cm height and movement, LZ00023 is the closest reference in the supplied set; confirm load and castors. If a beverage programme needs a 45 × 31 × 130 cm upright at 13 kg, LZ-007 is the reference; confirm anchoring and shelf load. If a compact stepped acrylic compartment is required, yakeli35 provides the millimeter-scale format; confirm mounting. If an acrylic cosmetic stand at 50 × 30 × 150 cm and 4.3 kg is required, LZ00102 is the reference; confirm customization and load. If material customization is central to a metal bottle fixture, LZ-019 is the reference; obtain dimensions and weight first.

Purchasing terms and acceptance criteria to confirm before ordering

Technical selection is complete only when the commercial and inspection terms are written into the quotation or purchase order. The purchasing terms for this topic list MOQ 50 pcs, delivery FOB SZ, China, pre-shipment inspection by either the buyer or a third party, and TT payment. The capability information lists MOQ 100 units, lead time 25–40 days, 100% testing and a monthly capacity of 30,000 units. Because the MOQ figures differ, confirm the applicable threshold for the exact reference and configuration in the order confirmation.

Order itemWhat to confirm in writing
Model and drawingExact reference, dimensions, net weight, material split, movement or fixing, finish and packaging.
MOQConfirm whether the applicable threshold is 50 pcs or 100 units for the chosen reference; do not assume one figure covers all five.
Delivery and paymentFOB SZ, China and TT payment terms; confirm port, packaging and document requirements.
Acceptance criteriaPre-shipment inspection by the buyer or a third party; dimensional check against the approved drawing; material and finish verification; movement test if movable; stability or anchoring check if static; packaging inspection.
Testing and lead timeThe manufacturer states 100% testing; confirm the test protocol and record. Confirm the 25–40 day lead time against the order quantity and configuration.
CustomizationSize, logo, material, color, structure and function can be customized under OEM/ODM supply. LZ-019 has customizable materials; LZ00102 is customizable. Lock each change in the approved drawing.
After-sales and documentsRemote after-sales support is provided. Company-level certificate records include ISO9001, ISO14001, ISO45001, SMETA and FSC chain-of-custody ESTS-COC-200456 for specified wood-based display products; confirm product-level applicability.

Acceptance should be tied to the approved drawing, not to a generic category description. For a movable fixture, inspect castors, locks and floor clearance. For an upright fixture, inspect the base, fixing points and stability. For acrylic, inspect bonding, edge finish and compartment alignment. For wood, inspect edges, surface finish and movement hardware. For metal+PVC, inspect the material split and joined surfaces. These checks convert the technical comparison into a repeatable release decision.

FAQ: specification, movement and ordering checks

How should I compare the dimensions of LZ00023, LZ-007, yakeli35 and LZ00102?

Convert all dimensions to the same unit first. LZ00023 is 40 × 40 × 160 cm, LZ-007 is 45 × 31 × 130 cm, LZ00102 is 50 × 30 × 150 cm, and yakeli35 is 160 × 122.5 × 186 mm, which converts to 16 × 12.25 × 18.6 cm. Compare footprint first, then height, then the internal compartment or shelf layout. LZ-019 dimensions are to be confirmed for the configured model.

Does a heavier display fixture mean it can hold more merchandise?

No. Net weight describes the fixture’s own mass; load capacity describes what the shelves and structure can support. LZ-007 is listed at 13 kg and LZ00102 at 4.3 kg, but the references do not provide shelf load ratings. Buyers should request load per shelf, overall load, test method and deflection limits for the intended merchandise configuration.

Which fixture is movable, and which fixtures need confirmation?

LZ00023 is explicitly described as movable. LZ-007 is described as an upright structure, while yakeli35 has a stepped cabinet structure, LZ00102 is a stand and LZ-019 is a bottle fixture. The latter four should not be assumed movable or static. Confirm castors, locking, feet, wall or floor fixing, anti-tip measures and floor clearance in the drawing.

Can these display fixtures be customized?

Customization covers size, logo, material, color, structure and function under OEM/ODM supply. LZ-019 has customizable materials, and LZ00102 is customizable. Customization must be tied to the exact model drawing, MOQ and approval sample. Material changes should not be treated as cosmetic changes because they can affect weight, joint details, finish and inspection criteria.

What purchasing terms and acceptance criteria should be confirmed before ordering?

Confirm the exact model and drawing, dimensions, weight, material split, movement or fixing, finish and packaging. The purchasing terms list MOQ 50 pcs, FOB SZ, China, pre-shipment inspection by the buyer or a third party, and TT payment. The capability information lists MOQ 100 units, lead time 25–40 days, 100% testing and remote after-sales support. Because the MOQ figures differ, require written confirmation for the chosen reference. For a specification review, download the ECO DDL company profile (PDF) or prepare an RFQ with the fixture model, load target and movement requirement.

Conclusion

Material choice is not a hierarchy. Wood, metal, acrylic and metal+PVC each create a different starting point for footprint, weight, movement, maintenance and merchandising. The five references show the variables that must be fixed before ordering: LZ00023 at 40 × 40 × 160 cm and movable; LZ-019 in metal with customizable materials and dimensions to be confirmed; LZ-007 at 45 × 31 × 130 cm and 13 kg in an upright structure; yakeli35 at 160 × 122.5 × 186 mm with a stepped cabinet structure; and LZ00102 at 50 × 30 × 150 cm and 4.3 kg as a customizable acrylic cosmetic stand.

A buyer who converts those parameters into an RFQ, load requirement, movement requirement and acceptance checklist makes a comparable decision rather than a visual guess. The same method can be applied to other display fixture categories, provided the specific unit’s dimensions, weight, material and load requirements are confirmed in writing.

Cosmetic display stand example for retail fixture review

Review the fixture drawing, movement requirement and acceptance criteria before placing the order.

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF
Latest